Thanks Discovery
Chart:
The following is another way to draw the Alan's square using the Gann Square
and Parallel Lines tools
Use the H and L from the first bar yesterday (8:20-8:30 bar) until 8AM today for the Chart one.
Apply the Gann Square and use the following properties window (colors can be changed) draw box lower left to upper right
Then use the parallel tool for angled lines.
Select the parallel tool from the drawtool bar
Put your cursor in the lower left corner - drag to opposite diagonal corner
of the middle box and let go and then move cursor to bottom corner right
underneath the upper corner.
(Discovery - Easier way to remember it might be to start at bottom on each
one and go to opposite diagonal corner, then down to the bottom below that
diagonal corner.)
Now right click, click on a tab number and change the property window to
the following if you desire different colors. Make sure mirror lines is checked
and extension is 0.
If you wish them to be a different color just set up another tab with
Then start at the right low corner to opposite diagonal down to the low under that upper diagonal for the angulars going the other way.
If you wish to have the parallels cover a large range use this one for the down ones
do not need 25 - 75 checked there